Technicolor Td5336 - Manual

: Plug the power adapter into the DC in port and wait roughly 5 minutes for the lights to stabilize.

In bridge mode, the TD5336’s Wi‑Fi and routing functions are disabled. To reverse, you must factory reset. Technicolor Td5336 Manual

Navigate to SETUP > Internet Setup . Select the appropriate profile and enter the PPPoE username and password provided by your ISP. : Plug the power adapter into the DC

Visit http://192.168.1.1/cgi-bin/dslstat – this page shows attenuation, SNR margin, and sync speed. Your manual hides this crucial diagnostic tool! Navigate to SETUP > Internet Setup

Should be solid green. If it's red or off, check your power connection.

Parental ControlsUnder the Content Filtering or Parental Control tab, you can restrict specific websites or set time limits for internet access for certain devices based on their MAC addresses.

Accessing the Web InterfaceConnect a computer to the modem via Ethernet or Wi-Fi (use the credentials printed on the sticker at the back of the device).Open a web browser and type 192.168.1.1 into the address bar.When prompted for a username and password, use the defaults:Username: adminPassword: (leave blank or check the device sticker)