Label 9x10 Driver

The driver is set to "Label Tear Off (Continuous)" instead of "Label Gap." Fix: Open the driver properties. Under Media Type , select Die-cut or Gap . Set the Gap Sensor length to 0.12 inches (standard gap).

| Printer Model | Driver Type | Max Media Width | Best For | | :--- | :--- | :--- | :--- | | | ZPL II Driver | 6.6 inches | Requires a specialized 9-inch wide driver (Note: 9" width exceeds Zebra's standard; alternative is Zebra ZT640 or SATO) | | SATO GL408e | SATO SBPL Driver | 10 inches | Excellent native support for 9x10 via "Label Wizard" | | Honeywell PM45 | Intermec Fingerprint | 10 inches | Supports 9x10 continuous rolls with Black Mark sensing | | Epson ColorWorks C8000 | Epson ESC/Label | 8.5 inches (Use 8.5x10) | Color label driver for 9x10 (closest size) | label 9x10 driver

9x10 mm Dual-Ended Screwdriver

After installation, go to .