If you want, I can:
Includes an extensive database of cylinders, valves, pumps, sensors, and controllers. Didactic Materials: If you want, I can: Includes an extensive
Acknowledgments
| Step | Action | Screenshot Cue | |---|---|---| | 1 | → “Nanban_4-2-Crack_Pneu_Hyd” | New‑Project dialog | | 2 | Add Supply → Drag “Compressor” (air) and “Pump” (oil) into the workspace. | Component palette | | 3 | Insert 4‑2‑Crack Valve → Choose “Festo 4‑2‑Crack (air)” and “Rexroth 4‑2‑Crack (oil)”. | Right‑click → “Properties” to set crack pressure. | | 4 | Connect to Accumulator → Use “Pipe” elements (specify length & diameter). | Pipe‑properties panel | | 5 | Place Cylinder → Double‑acting cylinder; set bore, stroke, piston rod area. | Geometry tab | | 6 | Add Load → “Mass” block (5 kg) attached to cylinder rod. | | | 7 | Insert Sensors → “Pressure Transducer” on supply line, “Flow Meter” on outlet. | | | 8 | Define Controller → “Digital Output” from PLC → “Valve Coil”. | | | 9 | Set Simulation Parameters → Time step = 0.001 s, total time = 2 s, solver = “Stiff‑ODE”. | | |10 | Run Baseline Simulation → Record pressure, flow, cylinder position. | Export data to CSV. | | Right‑click → “Properties” to set crack pressure