Ccna-2v7.0 Case Study -rev B- Today

Using Cisco's Network Assistant tool or Packet Tracer, design a network topology that meets the company's requirements. Your design should include:

enable configure terminal interface GigabitEthernet0/0 ip address 10.10.10.1 255.255.255.0 no shutdown exit router ospf 1 network 10.10.10.0 0.0.0.255 area 0 ccna-2v7.0 case study -rev b-

You must use Variable Length Subnet Masking (VLSM) to design both IPv4 and IPv6 schemes. Using Cisco's Network Assistant tool or Packet Tracer,

Configuring stateless or stateful DHCPv6 for IPv6 address management. Redundancy and Reliability: Using protocols like Spanning-Tree (STP) for loop prevention and EtherChannel for increased link bandwidth and redundancy. Wireless LAN (WLAN): ccna-2v7.0 case study -rev b-

From PC-B (Guest), ping 8.8.8.8. Use show ip nat translations to see dynamic entries.