Trane Baysens019c Manual [portable] Today

: Ensure the "TOP" indicator on the backplate is facing up and do not overtighten screws, as the plastic subbase may crack. Strip roughly 0.25 inches of insulation from each wire.

The screen buzzed. The numbers recalculated. trane baysens019c manual

Use 18 AWG copper wire for standard runs. Connect the two wires to the designated sensor terminals on the unit’s ReliaTel board (usually labeled as "Zone Sensor"). : Ensure the "TOP" indicator on the backplate

The Trane BAYSENS019C is a designed for use with Trane’s commercial HVAC equipment (specifically the Voyager, Precedent, and Intellipak units using the ReliaTel control system). It replaces the need to run new control wiring from the rooftop unit to the occupied space. The numbers recalculated

: To reboot the interface, navigate to Menu > Settings > Reboot to refresh the system without losing your main configuration.