Call us: +256 751 685 275
Study time: Monday - Saturday: 8 AM - 6 PM
Location: 150M from main road, 10 Km from Mityana Town
The device's operating system is stored on a read-only memory chip. Unlike Android-based units, it does not have an "Update" menu in the standard settings. Hardware Variants:
Incompatibility with specific LED drivers or circuit components.
| Scenario | What’s Happening | Action Needed | |----------|----------------|----------------| | | Device powers on, verifies firmware, then proceeds to home screen. | Wait 5–10 seconds. | | After firmware update | Confirms the new firmware is valid. | No action. Device will reboot automatically. | | Stuck on this message | Boot loop or corrupted firmware. | Perform a forced reset or reflash firmware (see below). | | In recovery menu | You manually entered update mode. | Use remote to select “Reboot” or “Exit”. |
Place the file in the (not inside any folder). Initiate Local Upgrade: Insert the USB drive into the projector's USB port.
The device's operating system is stored on a read-only memory chip. Unlike Android-based units, it does not have an "Update" menu in the standard settings. Hardware Variants:
Incompatibility with specific LED drivers or circuit components. yg300 firmware verified
| Scenario | What’s Happening | Action Needed | |----------|----------------|----------------| | | Device powers on, verifies firmware, then proceeds to home screen. | Wait 5–10 seconds. | | After firmware update | Confirms the new firmware is valid. | No action. Device will reboot automatically. | | Stuck on this message | Boot loop or corrupted firmware. | Perform a forced reset or reflash firmware (see below). | | In recovery menu | You manually entered update mode. | Use remote to select “Reboot” or “Exit”. | The device's operating system is stored on a
Place the file in the (not inside any folder). Initiate Local Upgrade: Insert the USB drive into the projector's USB port. | Scenario | What’s Happening | Action Needed