Since this is a "Dual" mig, setting the correct polarity is the most common hurdle:
If the wire won't feed even with high tension, your torch liner might be kinked or clogged with dust. 5. Troubleshooting Common Issues
If the machine gets too hot, the thermal cut-out will trip. The light will turn on, and the welder will stop until it cools down. 3. Setup and Wire Loading
Since this is a "Dual" mig, setting the correct polarity is the most common hurdle:
If the wire won't feed even with high tension, your torch liner might be kinked or clogged with dust. 5. Troubleshooting Common Issues cem dual mig 120 manual
If the machine gets too hot, the thermal cut-out will trip. The light will turn on, and the welder will stop until it cools down. 3. Setup and Wire Loading Since this is a "Dual" mig, setting the
TCS + All Companies Preparation (Complete Placement Program)
Enroll Now