Do you have a scanned copy of the Strands S68 manual? Share it on the Vintage Machinery forums to help preserve industrial history. And if you are looking for specific part numbers mentioned in this article, leave a comment below.
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | Dirty Jacobs taper or bent spindle | Remove chuck, clean taper with acetone, reseat firmly. | | Won't start | Thermal overload tripped | Wait 10 minutes. Press red reset button on motor housing. | | Gears grinding | Attempted shift while moving | Stop machine. Rock spindle by hand while shifting. | | Table won't crank | Dried grease on column | Loosen table lock. Spray penetrating oil under table bracket. | | Quill sticks | Broken return spring | Remove quill stop. Manually retract. Replace spring (Part #S68-14). | Strands S68 Drill Press Manual
Document version 1.0 – compiled from multiple owner’s manuals and field service notes for the Strands S68 drill press. Do you have a scanned copy of the Strands S68 manual
The Strands S68, produced by Machinery Scandinavia AB, is a durable Swedish gear-head drill press featuring 8 spindle speeds (100–2900 RPM) and a 1.1 kW motor suited for industrial metalworking. The unit includes a 360-degree rotating head, 140mm quill travel, and requires specific maintenance for its helical gears and tapered chuck. View the official spare parts list and manual from Machinery Scandinavia AB . Strands S68 Geared Head Drill - Newmac Equipment | Problem | Likely Cause | Solution |
[Any suggested tags: #workshop #drillpress #toolreview #DIY]
: 8 geared spindle speeds ranging from 100 to 2,900 RPM (some variants reach up to 3,600 RPM).