Sharp Lc-40le185m Service Manual

: This mode is used for panel inspection. The default color is typically Magenta, but it can be changed via service commands for functional checks. Troubleshooting Guide Common Cause Service Action Blinking Red Light Backlight LED Failure Replace LED strips and reset Lamp Error in Service Mode. Turns off after Logo Defective LED bulbs Check voltage at the LED driver and replace damaged bulbs. Power board or cord fault

Some common issues with the Sharp LC-40LE185M include: sharp lc-40le185m service manual

Replace the internal LED strips. You must then clear the "Lamp Error" in the Service Mode to restore normal operation. Power Failure (Dead Set) : This mode is used for panel inspection