Ericsson Mini Link Cli Commands Instant

: Used for file handling, such as moving configuration or software files.

alarm -list : The red text confirmed his fear. High Bit Error Rate (BER) . The link wasn't just down; it was screaming through the noise. 3. Tuning the Signal

You don't need to leave the CLI to test connectivity to the next hop. ericsson mini link cli commands

: Displays the current VLAN configuration and port assignments.

| Command | Description | |---------|-------------| | show users | Logged-in users | | username <name> password <pw> | Create/change local user | | aaa authentication login local | Set authentication mode (local only, or RADIUS) | | ssh enable | Enable SSH server | | telnet disable | Disable Telnet for security | | show access-list | Display management access control list | | access-list permit <ip> <mask> | Allow management from specific IP | : Used for file handling, such as moving

interface ethernet 1 description "To Core Router" speed 1000 duplex full auto-negotiation enable no shutdown exit

| Error Message | Meaning | Solution | | --- | --- | --- | | Permission denied | Insufficient privilege | Use enable command or higher-level user. | | Context not found | Wrong path | Run pwd and ls to verify location. | | Radio port not available | Hardware mismatch | Check radio ls for actual IDs. | | VLAN already exists | Duplicate ID | Use ethernet vlan ls to check existing. | | Link is down | No radio connectivity | Check radio perf-current , distance, and antenna alignment. | The link wasn't just down; it was screaming

If the radio link is down but the IDU is accessible, you can reset just the outdoor hardware: